CYPRESS SEMICONDUCTOR SERIAL FRAM NONVOLATILE MEMORY DEVICES

Cypress Semiconductor Serial F-RAM (ferroelectric RAM) memories combine the nonvolatile data storage capability of ROM with the fast speeds of RAM. Serial F-RAM features a variety of interface and density options, including SPI and I2C interfaces, industry-standard packages, and densities ranging from 4KB to 4MB. Cypress Serial F-RAMs have three distinct advantages over other nonvolatile memory technologies ...

Read more

SPD3303X / SPD3303X-E SERIES PROGRAMMABLE DC POWER SUPPLY

Product Overview Siglent’s SPD3000X Series Programmable Linear DC Power Supply has a 4.3 inch TFT-LCD display, supports Remote Programming and has a Real Time Wave Display. The ‘3000X family has three isolated outputs; two adjustable channels and one selectable channel from 2.5v, 3.3V, and 5V. It also has output short and overload protection and can be used in production and development. Key Features 3 inde ...

Read more

Interfacing GPS Module with PIC Microcontroller

GPS is the short-form of Global Positioning System. It is a system which provide accurate Altitude, Latitude, Longitude, UTC time and many more information, which are taken from 2, 3, 4 or more satellite. To read data from GPS, we need some Microcontroller and we already interfaced GPS with Arduino and with Raspberry Pi. We have selected G7020 GPS module which is made by U-blox. We will receive Longitude an ...

Read more

OSRAM’S SFH 5701 AMBIENT LIGHT SENSOR (ALS)

Osram Opto Semiconductors presents the SFH 5701 A01, a new ambient light sensor (ALS) with integrated circuitry (IC). The SFH 5701 A01 ambient light sensor is Osram Opto Semiconductors’ latest addition to its portfolio for the automotive sector and the company’s first IC-based component for which a separate power supply pin is not required. The ambient light sensor (ALS) is an active component in which the ...

Read more

MCP6V51 45 V ZERO-DRIFT OP-AMP

The MCP6V51 operational amplifier provides input offset voltage correction for very low offset and offset drift. This device provides a gain bandwidth product of 2 MHz, is unity gain stable, has no 1/f noise, and provides superior CMRR and PSRR performance. These products operate with a single supply voltage from 4.5V to 45V, with a maximum quiescent current of only 590 uA. The MCP6V51 op-amp from Microchip ...

Read more

Interfacing PIR Sensor with PIC Microcontroller

Today we are simple going to interface PIR with PIC Microcontroller PIC16F877A. In this circuit if some moving objects comes in the range of PIR sensor, the buzzer will start beeping. Material Required PicKit 3 PIR Sensor. PIC16F877A IC 40 - Pin IC holder Perf board 20 MHz Crystal OSC Female and Male Bergstick pins 33pf Capacitor - 2Nos, 100uf and 10uf cap. 680 ohm, 10K and 560ohm Resistor LED of any color ...

Read more

CYPRESS SEMICONDUCTOR PSOC® 6 BLE PROTOTYPING BOARD

Cypress Semiconductor PSoC® 6 BLE Prototyping Board (CY8CPROTO-063-BLE) is a low-cost hardware platform enabling design and debugging of PSoC 6 MCU based applications. The PSoC 6 BLE Prototyping Board provides easy access to all the device I/Os in a breadboard-compatible format, and includes an LED, a push button, and current measuring jumpers. This Board is designed with a snap-away form-factor, allowing u ...

Read more

TEXAS INSTRUMENTS TPSM846C24 HIGH-DENSITY STEP-DOWN POWER MODULE

Texas Instruments TPSM846C24 35A Power Modules offer a fixed frequency and incorporate the controller, power MOSFETs, inductor, and associated components into a thermally enhanced, surface-mount package. To set the operating parameters of the module, the user supplies the input and output capacitors as well as a few other passive components. A two-phase power solution can be achieved by configuring two modu ...

Read more

SENSETEMP – AN ACCURATE AND FLEXIBLE FOUR-CHANNEL TEMPERATURE SENSOR

SenseTemp by Capable Robot Components is an accurate and flexible four-channel temperature sensor for instrumenting electronics that is compatible with Adafruit M0 Adalogger and is of course Open Source. SenseTemp is an open source, four-channel temperature sensor designed for instrumenting electronics. It uses extremely accurate platinum resistive temperature detector (RTD) elements which are small enough ...

Read more

Digital Thermometer using a PIC Microcontroller and DS18B20

Generally, the LM35 temperature sensor is used with microcontrollers to measure the temperature because it is cheap and easily available. But LM35 gives analog values and we need to convert them into digital using ADC (Analog to Digital Converter). But today we are using DS18B20 temperature sensor in which we don’t need an ADC conversion to get the temperature. Here we will use PIC Microcontroller with DS18 ...

Read more
Scroll to top