Tiny and cheap lab generator
Function generator is a rely useful tool in the lab, a simple version can be build at home, there’s a lot of examples on the Internet, some are much more complex and powerful, but this one is intended to be really simple and cheap. It can be also built-in in some bigger projects that also requires a generator.
The generator can output (only) square signal with adjusted frequency and pulse width. The amplitude may be also modified by soldering different values on the voltage divider on the output, it’s a bit laborious, but if it will be used in digital or microprocessor projects, then there isn’t really need for amplitude adjustment.
The generator is built from two NAND gates (IC1A, IC1B), that’s a classic configuration used in many other circuits. S1 and C1-C8 selects the frequency, there is an equitation for it, but the general rule is that the more capacity thy have, the lower frequency is generated. By adjusting witch one switch are set to ON state, we can select plugged capacitors and the output frequency. R2-R4, D1, D2 changes pulse width.
For more detail: Tiny and cheap lab generator
EasyEDA: Ideas for Circuit Design, Innovation for Electronics Access
Free Circuit Design: Schematic – Simulation – PCB Layout – Gerber Viewer
Cheapest PCB Prototype: Only $2 for 10pcs 10×10cm PCBs, 24 hours Quick Turn, DHL Delivery in 3 Days