3-Channel IR Relay Controller with user programmable IR commands for PIC12F629

Description This project is a 3 channel infrared (IR) remote controlled relay driver.  It works with 12-bit SIRC IR signals as used by Sony remote controls. The controller also features the ability for the user to 'program' the commands it will respond to using  the IR remote control.   Each of the three relay channels can also be individually configured for either toggle or momentary switch action. Althoug ...

Read more

2-Channel IR Relay Controller for PIC10F200

Description This project is a 2 channel infrared (IR) remote controlled relay driver with power saving.  It works with 12-bit SIRC IR signals as used by Sony remote controls. The controller also features a power save feature which reduces the relay holding voltage to 50% of the relays nominal operating voltage once the relay has switched on. The board uses Microchip's low cost PIC10F200 microcontroller alon ...

Read more

A Remotely Programable Relay Controller (Christmas Lights or Home Automation Controller)

What was that?  A Whats-a-Maja-Thimagig? Yep - One of those!  This Instructable extends my Arduino Ethernet controller to control a set of up to 6 relays, but that's not the neat bit.  The neat bit is that there is a web based state machine in the AtMega chip so that the relays will operate in whatever sequence with whatever timing you want - all by themselves. This allows you to have a set of relays connec ...

Read more
Scroll to top