One Channel InfraRed Remote Controller




One Channel Infra-Red Remote and receiver with onboard Relay provides normally open and normally closed output. The project based on PIC12F683 Microcontroller from Microchip , TSOP1738 used as Infra-Red receiver. Micro-controller decodes the RC5 serial data coming from TSOP1738 and provides high output if the data is valid. The output can be set Momentary or Latch using on board Jumper (J1) and closure. The board provided with 3 LEDs, Power LED, Valid Transmission LED and Output LED. This Remote works with switch No1 of RC5 Remote.

One Channel InfraRed Remote Controller

 

Features

  • Power Supply Remote  2X AA Batteries
  • Power Supply Receiver  7-12V DC
  • Current Consumption Receiver 30mA
  • Onboard jumper for momentary and latch operation selection
  • Transmitter range 10-15 feet
  • RC5 (Philips) Remote
  • Onboard power LED
  • Onboard output ON/OFF  LED
  • Onboard Valid Transmission LED
  • Onboard 5V regulator
  • PCB Dimensions 59.06 MM X 29.53 MM

For More Details :  One Channel InfraRed Remote Controller




READ  PIC RC Motor Controller (and example lego robot)

Leave a Comment

*
= 5 + 8

Read previous post:
PIC12F675 internal EEPROM
PIC12F675 internal EEPROM code and Proteus simulation

This post provides the internal EEPROM reading and writing code for PIC12F675 microcontroller. As we know, PIC12F675 microcontroller has 128 bytes...

Close
Scroll to top