The good life, they say, sometimes does not cost a fortune, with the new RD6006 from Ruideng, you can precisely program the amount of power needed for your project via USB / WiFi communication or via the embedded control panel. The RD6006 digital control Switching Adjustable power supply is a programmable, DIY Flavoured, bench PSU […]
RD6006 DIGITAL CONTROL SWITCH ADJUSTABLE POWER SUPPLY STARTS FROM JUST $57 Read More »
The DC205 low-noise, high-resolution DC voltage source is the right tool when a precision bias source is needed. Its bipolar, four-quadrant output delivers up to 100 V with 1 ”V resolution and up to 50 mA of current. In 4-wire mode (remote sense), the instrument corrects for lead resistance delivering accurate potential to your load.
DC205 â PRECISION DC VOLTAGE SOURCE Read More »
T31SN series of 1/32 Brick, 9~53V input, single output, non-isolated DC/DC converters, are the latest offering from a world leader in power systems technology and manufacturing â Delta Electronics, Inc. This product family provides up to 100 watts of power or 8A of output current. With creative design technology and optimisation of component placement, these
DELTA T31SN 100W DC/DC FAMILY IN COMPACT 1/32 BRICK FORMAT Read More »
SecurityHardware.com is set to take FT2232H-based USB Serial Adapters and Debuggers to the Next Level. The Portland-based company will soon be launching a Crowdfunding campaign for its latest design, an open-source FTDI FT223H-based multi-protocol, multi-voltage hardware hacking device called Tigard. Tigard is a one-stop board for developers looking for something a little more than the average USB-UART debugging tool. Speaking
MEET THE TIGARD BOARD; A NEW FT2232H-BASED USB SERIAL ADAPTER/DEBUGGERS Read More »
Developer Board 4 V3 is a single board computer based on Qualcomm Snapdragon 410E SoC with 2GB DDR3, 16GB EMMC, HDMI, MIPI-CSI, 40- and 60-pin expansion connectors. Fully structurally compatible with the 96boards CE standard.It features advanced processing power, WLAN, Gigabit Ethernet, Bluetooth, GPS, all packed into a board the size of a credit card.The
DEVELOPER BOARD 4 V3 â EMBEDDED PLATFORM BASED ON QUALCOMM SNAPDRAGON 410E SOC Read More »
The nRF9160 Feather by Jared Wolff (aka Circuit Dojo LLC) is an electronics development board, which is a system-in-package part of nRF91 series that enables NB-IoT and eMTC (LTE-M) IoT connectivity, as well as assisted GPS. The package is available in an Adafruit Feather form factor. nRF9160 Feather board supports both CAT M1 LTE and NB-IoT for communication with
NRF9160 FEATHER LAUNCHES FOR $99 WITH GPS SUPPORT Read More »
The concept of âa connected carâ is no longer a figment of the imagination of movie producers but an everyday reality. Different communication protocols along with data from different sensors are being leveraged across the automotive industry to provide advanced features/services like usage-based insurance to users while monitoring different parameters that indicate the health of
MEET THE IWAVE TELEMATICS CONTROL UNIT WITH 4G, WIFI AND BLUETOOTH Read More »
NXP Semiconductors PCF2131 Nano-Power Highly Accurate Real-Time Clock (RTC) features an integrated Temperature Compensated Crystal (Xtal) Oscillator (TCXO) and a 32.768kHz quartz crystal. The PCF2131 is optimized for very high accuracy and ultra-low power consumption. The PCF2131 offers a selectable I2C-bus or SPI-bus, a backup battery switch-over circuit, a programmable watchdog function, four timestamps function, and many other features.
NXP SEMICONDUCTORS PCF2131 NANO-POWER HIGHLY ACCURATE RTC Read More »
Fibocom, a global leading provider of IoT (Internet of Things) wireless solutions and wireless communication modules, announces that its 5G module FG360-NA has been successfully certified by a US major carrier. The module is now qualified to provide wireless connection services under the US 5G network, which accelerate the deployment of 5G FWA (Fixed Wireless Access) in the US
Adding another feather to the extensive portfolio of NXPÂź i.MX-based Single board Computers, iWave recently launched the iW-RainboW-G34S, a single board computer based on NXP i.MX 8M Mini applications processor in a PICO-ITX form factor. iWave supports Linux 5.4.70, Ubuntu 20.04, Buildroot 2021.02 and Android 11 on the platform, supported with an extensive BSP support team and continuous
IW-RAINBOW-G34S: I.MX 8M MINI SINGLE BOARD COMPUTER Read More »
