Electronics News and Updates

CATENA 4710 – LORAWAN BASED FEATHER COMPATIBLE FPGA BOARD WITH RISC V CORE

CATENA 4710 – LORAWAN BASED FEATHER-COMPATIBLE FPGA BOARD WITH RISC-V CORE

With the increase of high integration programmable chips, FPGAs are getting more and more popular. FPGAs has been traditionally known to be generally complex, but a new line of FPGAs have been showing some promise and that is believed that will help increase their popularity. Tiny FPGAs are the next promising thing, they are low-cost FPGA boards in a […]

CATENA 4710 – LORAWAN BASED FEATHER-COMPATIBLE FPGA BOARD WITH RISC-V CORE Read More »

Using the OpenScope MZ in LabVIEW

Using the OpenScope MZ in LabVIEW

Introduction In this tutorial, we will go over how to connect an OpenScope MZ to LabVIEW. To do so, I will be walking you through some example VIs that I made. These examples allow you to access the oscilloscope and Wavegen/DC power supply functions of the OpenScope as well as the GPIO pins and the Logical Analyzer. Materials Hardware

Using the OpenScope MZ in LabVIEW Read More »

SITIME PRESENTS A FAMILY OF MEMS OSCILLATORS FOR MOBILE APPLICATIONS

SITIME PRESENTS A FAMILY OF MEMS OSCILLATORS FOR MOBILE APPLICATIONS

Low-Power Oscillators SiTime Corporation’s general purpose low-power oscillators offer a perfect combination of low power consumption, excellent stability, small size, and fast start-up. Parts are also available in an SOT23 package which offers excellent board-level solder-joint reliability and enables low-cost, optical-only board-level inspection. Now system designers have lower frequency options based on programmable MEMS timing technology. This technology

SITIME PRESENTS A FAMILY OF MEMS OSCILLATORS FOR MOBILE APPLICATIONS Read More »

NICAD NIMH BATTERY MONITOR

NICAD-NIMH BATTERY MONITOR

This project is a NiCad-NiMh Battery Monitor based on LM3914 IC DESCRIPTION The simple project can be used as test gear. Its easy way to monitor the battery voltages, especially dry cell, NICAD, NIMH, supply up to 1.5 Voltage. Battery Monitor range 0.15V to 1.5V. The project is built around Texas instruments LM3914, The LM3914

NICAD-NIMH BATTERY MONITOR Read More »

2.8VIN TO 22VIN 2A LOUT 4 SWITCH INTEGRATED BUCK BOOST CONVERTER WITH I2C INTERFACE

2.8VIN TO 22VIN, 2A LOUT, 4-SWITCH INTEGRATED BUCK-BOOST CONVERTER WITH I2C INTERFACE

Monolithic Power Systems has introduced a new synchronous, 4-switch integrated buck-boost converter, the MP8862. The converter can regulate the output voltage from a wide input voltage range of 2.8V to 22V with high efficiency. The converter supports an Iout of 2A. Vout ranges from a 1V minimum to a maximum of 20.47V with a 5mV resolution controlled through I2C. The device can operate

2.8VIN TO 22VIN, 2A LOUT, 4-SWITCH INTEGRATED BUCK-BOOST CONVERTER WITH I2C INTERFACE Read More »

10W STEREO AUDIO AMPLIFIER

10W STEREO AUDIO AMPLIFIER

This project is a 10W Stereo Audio Amplifier based on TDA1521 IC. DESCRIPTION The project built around Philips TDA1521 IC, The project provides high quality audio 2X10W Audio output. The device is especially designed for mains fed applications, (e.g. Stereo TV Sound and Stereo Radio). The circuit designed for asymmetrical power supply systems. SPECIFICATIONS It has few external

10W STEREO AUDIO AMPLIFIER Read More »

KONTRON’S SMARC SAMX8X FEATURES NXP I.MX8X LOW POWER SOC

KONTRON’S SMARC-SAMX8X FEATURES NXP I.MX8X LOW POWER SOC

Kontron has launched the “SMARC-sAMX8X” module with low power I.MX8X series processor. The SMARC module runs Linux on a dual- or quad Cortex-A35 i.MX8X SoC with up to 3GB LP-DDR4, up to 64GB eMMC, dual GbE controllers, and PCIe. Kontron’s SMARC-sAMX8X delivers NXP’s mid-range i.MX8X SoC package in an 82 x 50mm SMARC 2.0 form factor, just like Congatec’s Conga-SMX8X module. Other i.MX8X modules include a

KONTRON’S SMARC-SAMX8X FEATURES NXP I.MX8X LOW POWER SOC Read More »

SIPEED MAIX AI AT THE EDGE

SIPEED MAIX: AI AT THE EDGE

Sipeed MAix: AI At The Edge AI is pervasive today, from consumer to enterprise applications. With the explosive growth of connected devices, combined with a demand for privacy/confidentiality, low latency and bandwidth constraints, AI models trained in the cloud increasingly need to be run at the edge. MAIX is Sipeed’s purpose-built module designed to run

SIPEED MAIX: AI AT THE EDGE Read More »