Infineon packages diode with IGBT
Infineon is sampling an IGBT package which can hold an IGBT up to 120A and a full rated diode in the same footprint and pin-out as JEDEC standard TO-247-3. Volume production is planned for Q1 2015.
The TO-247PLUS can be used in industrial applications such as UPS, welding, solar, industrial drives as well as automotive applications such as powertrain inverter to upgrade existing designs for higher power output or to improve the thermal conditions in the application consequently improving the system reliability and lifetime.The higher current capability of the TO-247PLUS allows for reducing the number of devices in parallel thus enabling more compact product designs.
The package is designed for clip or pressure mounting to the heat sink. These mounting techniques ensure homogeneous distribution of pressure over the package, better heat conductivity and higher mechanical stability even under strong vibrations and mechanical shocks.
Due to the absence of the mounting hole the TO-247PLUS package may accommodate a 70% larger silicon die area compared to standard TO-247.
The 26% larger thermal pad area contributes up to a 20% lower thermal resistance Rth (jh) compared to standard TO-247, says Infineon.
The package body has “plastic trousers” to increase the creepage distance to 4.25mm – 2mm larger than the TO-247-3.
For more detail: Infineon packages diode with IGBT
EasyEDA: Ideas for Circuit Design, Innovation for Electronics Access
Free Circuit Design: Schematic – Simulation – PCB Layout – Gerber Viewer
Cheapest PCB Prototype: Only $2 for 10pcs 10×10cm PCBs, 24 hours Quick Turn, DHL Delivery in 3 Days
Current Project / Post can also be found using:
- igbt infineon package