Cypress Bluetooth Module




EZ-BLE PRoC Module is a fully integrated, 10 x 10 x 1.8 mm,  fully certified, programmable module designed for ease-of-use and reducing time-to-market. It contains Cypress’s PRoC BLE chip, two crystals, chip antenna, shield and passive components.

Cypress Bluetooth Module

EZ-BLE PRoC Module Highlights

  • Small 10 mm X 10 mm X 1.8 mm footprint
  • Pre-certified to enable faster design cycles
    • Bluetooth® 4.1 qualified with QDID
    • Compliant with international RF regulations:
      FCC (USA), IC (Canada), MIC (Japan), CE (Europe) and KC (Korea)
  • PSoC® CreatorTM Integrated Development Environment
  • 48-MHz ARM® Cortex®-M0 microcontroller
    • 32-bit processor (0.9 DMIPS/MHz)
    • 128-KB flash and 16-KB SRAM
  • Bluetooth 4.1 compliant Bluetooth Low Energy radio
    • Integrated balun, -91-dBm Rx sensitivity, up to +3-dBm Tx power

 

For More Detail:Cypress Bluetooth Module




Leave a Comment

*
= 4 + 4

Read previous post:
Circuit-Zone.com – Electronic Projects

For a long time I needed a good programmer pussy, even if it is programming, so from time to time...

Close
Scroll to top