Building a USB mouse using PIC18F4550 microcontroller and CCS C compiler is easy as shown in the link below: USB Mouse using PIC18F4550 microcontroller Also, it is not hard to add an infrared remote control to the previous USB project. This post shows how did I build a simple IR remote controlled USB mouse using […]
Remote controlled USB mouse using PIC18F4550 Read More »
Adns2610 interesting optical mouse sensor circuit out of the detected motion is displayed on a computer screen. PIC18F4550 USB connection on the circuit board are available. Normal mouse but sees his job applications were done with PIC and MPLAB… Electronics Projects, Use ADNS2610 Optical Mouse Sensor PIC18F4550 USB “microchip projects, microcontroller projects, Adns2610 interesting optical mouse sensor circuit
USE ADNS2610 OPTICAL MOUSE SENSOR PIC18F4550 USB Read More »
This is an example USB project showing how to interface an optical mouse sensor (the ADNS-2620) with a standard XP/Vista computer. The TD-USB-01 board with a PIC18F2550 communicates with: the PC: USB 2.0 through a mini-B connector. the mouse sensor board: SPI over 4-wire flatcable. Here are the technical specifications: PC Win XP/Vista interface application
TD-USB-01 interface with mouse sensor board using PIC18F2550 Read More »
The USB Bluetooth dongles are quite popular nowadays. Most wireless computer mouse comes with a USB Bluetooth dongle which enables wireless communications to your PC. A USB Bluetooth dongle is a very quick and inexpensive means to allow Bluetooth communications onto your computer. To use the dongle, you simply need to plug it in the
BLEUIO: BLE 5.0 USB ADAPTER Read More »
Virtual desktops are used extensively in the IT sector currently due to the COVID-19 pandemic. This set-up allows the employees to work remotely and is convenient. Virtual desktops are preconfigured images of operating systems and applications in which the desktop environment is separated from the physical device used to access it. Users can access their
I2S USB MICROPHONE USING STM32 AND MEMS MICROPHONE Read More »
Figure 1: USB Communication Circuit Diagram The HID device class code is “0x03, this class is used for devices operated by human, devices like keyboard, mouse, joystick and so forth. The advantage of HID devices is that, they don’t require to install drivers, in most modern operating systems, the device will be detected without any
USB Human Interface Device Communication with PIC Microcontroller – MikroC Read More »
Introduction This page describes a project a colleague and I completed between September, 2000 and March, 2001 as part of the Engineering Physics degree program at the University of British Columbia. In summary this project involved building a USB device using the PIC 16C745 microprocessor from Microchip. The USB device consisted of a microphone, the
USB and PIC Microprocessors 16C745 and 18F2455 Read More »
PICkit 2 Introduction: There are many PIC programmer available, commercial and DIY devices. As Microchip introduces the new microprocessors the programming software got to be updated accordingly playing catch-up with the PIC manufacturer. That is the root of the problem with third-party PIC programmers. Microchip’s PICkit 2 is the low cost ICSP programmer for
Pickit 2 Download & Develop Your own USB pickit ii programmer Read More »
The USB-C PD-Sink is a board by Pier 42 that enables any device to be powered from a USB supply. It allows the option to set the voltage at 5V, 9V, 12V, 15V or 20V and allowing current as high as 5A. The current settings are very flexible in steps of 250mA from 0 to 5A, but this depends
MINI USB-C PD SINK BOARD ENABLES POWER REGULATION FOR ANY DEVICE Read More »
USB 3.0—Everything you need to know In the last 14 years, the Universal Serial Bus (USB) has become the standard interface to connect devices to a computer. Whether it’s an external hard drive, a camera, the mouse, a printer, or a scanner, the physical connection to transfer data between devices generally is a USB cable.
USB 3.0—Everything you need to know Read More »
