8051 ELEVATOR PROJECT STEPPER MOTOR CONTROL

This application step (step) motor control, input and output ports through 8051 will examine the circuit by providing lift. We use our stepper motor circuit. As we know, certain steps of the stepper motor, moving the appropriate signals are… Electronics Projects, 8051 Elevator Project Stepper Motor Control “avr project, microcontroller projects,

8051 ELEVATOR PROJECT STEPPER MOTOR CONTROL

This application step (step) motor control, input and output ports through 8051 will examine the circuit by providing lift.

We use our stepper motor circuit. As we know, certain steps of the stepper motor, moving the appropriate signals are sent to the windings of a motor coach that is brought to the desired position. About this circuit about 3 ° ~ 15.3 ° with a step angle of a stepper motor is used. And our program assigns the value 10 to the tour and variable speed of about 315 ° rotation of the engine have achieved.

Stepper motors are available in the market as we know it ended the 4.5.6. We are in our circuit, we used 6-pin stepper motor. Therefore, we gave two ends to +12 volt supply. Our circuit is typically used to drive the stepper motor circuit, we used all the ULN2003. Thus, when applied to input logical “1”, all the circuits from the output of “0” is received and the motor is driven.

About half are 5 buttons. These buttons can be pressed in case our engine for each floor, how many times would return is known, because the last printed value, then the printed value of the difference between the taking, engine of our transfer we calculate and in this way our engine to the desired point income. The most recent published value compared to the value at that moment pressed, our engine up or down (left or right) will be decided to return.

8051 ELEVATOR SCHEMATIC

8051 ELEVATOR SCHEMATIC

8051 Elevator Project Stepper Motor Control keil source code proteus isis simulation file:

FILE DOWNLOAD LINK LIST (in TXT format): LINKS-2918.zip

Source: 8051 ELEVATOR PROJECT STEPPER MOTOR CONTROL

About The Author

Muhammad Bilal

I am a highly skilled and motivated individual with a Master's degree in Computer Science. I have extensive experience in technical writing and a deep understanding of SEO practices.